Grove - Base Shield v1.2

From Wiki
Jump to: navigation, search

Introduction

The Grove base shield board is very similar in fashion to an Arduino shield board, and in fact is used as such with our Seeeduino or Mega board. Here is a top-down view:


500px-Stem1 副本.jpg


For those working with Seeeduino or Arduino boards, the layout should be quite familiar. The labels on the "Power" header pins may be confusing - the new Arduino Uno has two ground pins between the Vin and 5v, and label "GND" twice, but the Base Shield labels match the Duemilanove which label "GND" once, wider, to indicate both pins.

Features

Teach children the magic world of micro-controllers and Arduino Create a sturdy, modular robot platform that you can easily expand or modify. Learn programming without all the extra hassle of wiring the components. Application Ideas

Application1 Application2 Application3 Cautions

The warnings and wrong operations possible cause dangerous. Schematic

The purpose of the base shield is to allow easy connection of any microprocessor input and output pins to the Grove units. Each socket is clearly labelled with its matching I/O pin. For a more detailed examination of the Base Board, please consider the following diagram:


Stem-diagram-sign.jpg


Specification

May include key specification and other specifications. Pin definition and Rating

Mechanic Dimensions

Usage

There is one small thing to take note of when connecting to analog or digital sockets. Each socket contains 5V, GND, and two I/O pin connections:


400px-Stem-diagram-conn-right 副本.jpg


Hardware Installation When using the digital I/O, note the staggered alignment of the pins – that is, one socket handles D1 and D2, the next D2 and D3, and so on. If you are going to use an input Grove and an output Grove which have two signal pins simultaneously (e.g. LED module and button module), separate your wires so that a socket is between them as such:

File:400px-Stem-diagram-conn-right.jpg


Wires for two signal Grove cannot sit side-by-side on the Base board because one pin (such as D2) will be multi-using. Or, if two Grove units only use one digital pin, such as the tilt switch and the piezo, they can sit together on the Base board as they only use one of the digital lines in the connecting wire and therefore will not interfere with each other. It is the same as the Analog I/O sockets. Make sure you know the silkscreen of each socket before you start wiring. Programming Includes important code snippet. Demo code like : Demo code { } Example Project One - Blink Project Two – Digital Input Project Three – Analog Input Project Four – Noise Maker Project Five – Relay Control Project Six – LCD Demonstration Project Seven - Temperature Project Eight - Thermostat Bill of Materials (BOM) /parts list

All the components used to produce the product. FAQ

Please list your question here: Support

If you have questions or other better design ideas, you can go to our forum or wish to discuss. Version Tracker

Revision Descriptions Release Grove - Starter Kit v0.9b Initial public release Jan 14, 2011 Bug Tracker

Bug Tracker is the place you can publish any bugs you think you might have found during use. Please write down what you have to say, your answers will help us improve our products. Additional Idea

The Additional Idea is the place to write your project ideas about this product, or other usages you've found. Or you can write them on Projects page. Resources

The resources need to be downloaded, like Eagle file, Demo code, project or other datasheet. File:Base shield V1.2 Eagle files.zip How to buy

Click here to buy Grove - Base Shield: http://www.simgin-chip.com/depot/grove-base-shield-p-754.html?cPath=132_134. It is one components of Grove pack sale, Users can buy GROVE - Starter Kit V0.9b at http://www.simgin-chip.com/depot/grove-starter-kit-p-709.html?cPath=138. See Also

GROVE System GROVE - Starter Kit V1.0b GROVE - Starter Kit V0.9b Grove - 3-axis Compass Grove - 3-axis Gyro Grove - Alcohol Sensor Grove - Electricity Sensor Grove - Electricity Sensor Grove - I2C 3-axis Accelerometer Grove - Light Sensor Grove - Magnetic Switch Grove - Magnetic Switch Grove - PIR Motion Sensor Grove - 80cm Infrared Proximity Sensor v0.9 Grove - RTC Grove - Serial LCD Grove - Sound Sensor Grove - Temperature and Humidity Sensor Grove - Touch Sensor Grove - Water Sensor Grove Wanted Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.